1 9

HAWK'S WORK

Pixhawk 2.4.8 Flight Control, Open Source PX4 autopilot

Pixhawk 2.4.8 Flight Control, Open Source PX4 autopilot

$185.99
$185.99
Sale Sold out
Shipping calculated at checkout.
样式
View full details
  • Stable Autopilot - Pixhawk2.4.8 can be used as a master controller for fixed-wing, multi-rotor, helicopter, boat, car, etc. By connecting motor, servo, camera, sensor, microcomputer, it enables autopilot or remote driving.
  • Secondary Development - It is an independent, open source, efficient flight controller, supports rich function modules, and capable hobbyists can carry out secondary development. It is the first choice for autopilot starter, researcher and developer.
  • High-end Configuration - New layout and technical upgrade base on 3DR PIX. Advanced 32F427 ARM Cortex M4 Core high-performance processor, 32-bit fail-safe co-processor, MPU 6000 3-axis accelerometer.
  • Newbie Friendly - We have prepared a quick start guide for new players that will assist you with the basic assembly and calibration of a DIY F450 drone. Please contact us if you need it.
  • Quality Assurance - Pass the quality inspection before shipment, free repair or replacement within 3 months if quality problem occurs.

Frequently Asked Questions

Q1. Why the Pixhawk can’t arm? What should I do?

1. Complete the wiring and calibration of the Pixhawk according to the manual;

2. Connect the Pixhawk to a computer to check the error message;

3. Fix it according to the troubleshooting list.

Q2：Why does the motor not rotate or rotate at an inconsistent speed?

1. Check the battery voltage;

2. Complete the ESC calibration according to the manual;

3. Identify the faulty motor or ESC, then replace it.

Pixhawk 2.4.8 Specifications

Main Processor: 32-bit STM32F427 Cortex M4 core with FPU

Co-processor: STM32F103

Flash: 2 MB

RAM: 256 KB

Gyro & Accelerometer: MPU6000

Barometer: 5611

PWM Output: 8 OneShot/PWM Output (Configurable)

Aux Output: 6 PWM Output (Configurable)

Power Module Input Voltage: 2-6S

BEC Input Voltage: 5.3V±0.2V

USB Input Voltage: 5V±0.3V

Servo Input Voltage: Not applicable

M8N GPS Specifications

Velocity Precision: 0.1 m/s

Max Height: 50,000 m

Max Speed: 515 m/s

Max Acceleration: 4 G

Update Rate: 10 Hz

Time to First Fix: Cold start: 26s, Hot start: 1s

Power supply: voltage DC 5V±5%

Diameter: 54 mm / 2.126 inch

Thickness: 15 mm / 0.59 inch

  • Excellent master controller for fixed-wing, multi-rotor, helicopter, boat, car, etc. Ideal for beginner to learn the basic calibration.

  • By connecting the Raspberry Pi and other components, experts can use it for in-depth learning and secondary development.

  • Mission Planner is required for calibration. Both Mission Planner & QGroundControl can be used to plan routes.

  • Pixhawk Kit

    - Pixhawk 2.4.8 board

    - Power Module

    - Safety Switch

    - Buzzer

    - 8G SD Card

    - Shock Absorber

    - Wires (Micro USB data cable, 3-pin to 3-pin, 4-pin to 4-pin, 6-pin to 6-pin)

    - Foam adhesives

  • GPS Kit

    -M8N GPS

    -Foldable mounting bracket

  • Pixhawk + GPS

    ALL of Pixhawk kit & GPS kit